AUM 017 Wall-mounted wash basin, large sink
Nerezové umyvadlo AUM 017AUM 017 is an automatic stainless steel wash basin to be fixed on wall. The wash basin is not equipped by usual sensor mixer but a durable st. steel arm is used with incorporated contactless sensor control. This way the wash basin is much more resistant to damage. Optoelectronic sensor reacts to hands under the arm – when hands are placed to sensor zone water automatically starts running as the electromagnetic valve opens. The valve stays open for a pre-set period of time after hands are removed (delay time). Wash basin is equipped against hot water overpressure.
We also supply the wash basin as a bowl without arm. When ordering it needs to be specify if a wall mixer (without a hole in wash basin) or pillar mixer (diameter of hole in the wash basin) is to be used. Outlet and fittings comprise a part of the delivery. Material thickness of st.steel sheathing is 1.5 mm.
The AUM 017 stainless steel washbasin, in its construction and finish, meets EU standards and is mainly intended for food processing industry. It may be utilized in any other operations, where increased hygienic standards along with maximal water savings are required.
AUM 017 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- sink with sheathing
- automatic tap according to chosen type of power supply and water connection
- connecting hoses
- small assembly materials
- waste siphon
- 4x AA battery (for versions with battery supply)
- through-flow water heater (for AUM 017.E)
| Radius of sensor | self-adjusting |
| under outflow arm | |
| Water inlet | G 1/2“ |
| Water outlet | d = 40 mm |
| Inner dimensions of sink | d = 370 × 120 mm |
| Adjustable time of after-flow delay | 0–4 s (adjusted to 1 s) |
| AUM 017.1, .2, .TV (+ battery version) | |
| Water pressure | 0,1–1,0 MPa (0,2–0,8 MPa battery versions) |
| Power supply | 12 V, 50 Hz |
| 6 V (4× AA battery at battery versions) | |
| Power requirement | 6 VA |
| Source of power supply | ZAC 1/20 (max. 3× AUM 017.1, 017.TV, 017.2) |
| ZAC 1/50 (max. 8× AUM 017.1, 017.TV, 017.2) | |
| IP protection | IP 55 |
| Weight | 14 kg |
| AUM 017.E | |
| Water pressure | 0,2–0,6 MPa |
| Recommended water pressure | 0,3 MPa (without fluctuation and air bubbles) |
| Power supply | 230 V, 50 Hz |
| Power input | 3 500 W |
| IP protection | IP 54 |
| Weight | 15,5 kg |
- A –
cold water (AUM 017.2, .TV, .E), premixed water (AUM 017.1), pipe G 1/2" inner winding
- B –
hot water (AUM 017.2, .TV), pipe G 1/2" inner winding
- C –
electricity supply
- D –
outlet
n
n
n
