AUM 13 Wall-hung built-in sensor-controlled tap with a mixing or thermostatic valve
AUM 13 is a design sensor-controlled tap to be built in the wall. When hands are inserted into the scanning zone, water starts running and keeps running for a set time after hands are taken out (washbasin rinsing time). Two version types are offered – AUM 13.2 with mixing valve and AUM 13.TV with thermostatic valve. The distance of the assembly box from the front panel is adjustable.
The front panel is made of AISI 304 stainless steel, with highly polished surface treatment.
Package contents
- electronics
- electromagnetic valve
- installation box with bolting, spherical vavle and hoses
- st.steel cover with tap
- mixing valve (AUM 13.2)
- thermostatic valve (AUM 13.TV)
| Radius of sensor | self-adjusting |
| Water inlet | G 1/2“ |
| Watter pressure | 1 - 10 Bar (0,1 - 1,0 MPa) |
| Adjustable time of after-flow delay | 0-4 s (adjusted to 1s) |
| Power supply | 12 V, 50 Hz |
| Power requirement | 6 VA |
| Source of power supply | ZAC 1/20 (max. 3x AUM 13) |
| ZAC 1/50 (max. 8x AUM 13) | |
| ZAC 1/36L (max. 6x AUM 13) |
- Prepared water inlet according to the scheme
- Prepared el. supply cable 12 V, 50 Hz from source ZAC
- Prepared alcove for installation box (+ tiling)
- A –
Water inlet - cold water G 1/2"
- B –
Wate inlet - hot water G 1/2"
- C –
Electricity supply 12 V, 50 Hz from source ZAC
- E –
Scanning zone
n
n
n
