AUM 03 sensor-controlled stainless steel washbasin
AUM 03 is a sensor-controlled stainless steel wall-mounted washbasin. The washbasin is equipped with a sensor-controlled welded stainless steel outlet arm. Water turns on automatically when the user’s hands are placed within the sensor’s range and turns off when they have been removed. Water stops running with a certain time delay after the hands have been removed from the scanning zone. The washbasin is equipped with a mechanism against excess pressure of hot and cold water.
AUM 03 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
The AUM 03 stainless steel washbasin, in its construction and finish, meets EU standards and is mainly intended for food processing industry. It may be utilized in any other operations, where increased hygienic standards along with maximal water savings are required.
Package contents
- sink with sheathing
- photocell head
- electronics
- electromagnetic valve
- corner valve with filter (AUM 03.2 and .TV – 2 pcs)
- mixing valve (AUM 03.2)
- thermostatic valve (AUM 03.TV)
- waste siphon
- connecting hoses
- small assembly materials
| Radius of sensor | self-adjusting |
| Water inlet | G 1/2“ |
| Water pressure | 0,1 – 1,0 MPa |
| Outlet | d = 40 mm |
| Inner dimension of the washbasin | 520 x 320 x 100 mm |
| Electricity protection | IP 55 |
| Adjustable time of water flow | 0 – 4 sec. (adjusted to 1 sec.) |
| Power supply | 12 V, 50 Hz, or for battery versions 6V (4 x AA battery) |
| Power requirement | 6 VA |
| Source of power supply | ZAC 1/20 (max. 3 x AUM 03) |
| ZAC 1/50 (max. 8 x AUM 03) | |
| Weight | 9 kg |
- Set-up water inlet as per picture
- Set-up outlet d = 40 mm
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
- A –
cold water (AUM 03.2, .TV)
mixd water (AUM 03.1)
inner pipe G1/2" - B –
hot water (AUM 03.2, .TV)
inner pipe G1/2" - C –
electricity supply
- D –
outlet
- E –
zone of scaning
n
n
n
n
