AUM 18P stainless-steel piezo controlled tap
AUM 18P is a stainless-steel tap controlled with a piezo button, intended for installation on the basin with the D33 hole.
When you touch the button, water starts flowing for the preset time. This cycle can be repeated arbitrarily. After two cycles, there may (or may not) be a pause during which the water is not flowing.. If the button is touched during this period, nothing happens and water does not flow. The delay period can be set to 0 – 42.5 minutes. If the delay period is set to 0, water can be turned on any time by touching the button.
ZAC – source of power supply 12V, 50Hz
| Time of water flow | 1 s – 42,5 min (in 10 s steps) – set to 3 min |
| Time of pause | 0 – 42,5 min (in 10 s steps) – set to 30 s |
| Power requirement | 6 VA |
| Water pressure | 1 - 10 Bar |
| Diameter of installation opening in washbasin | min. 33 mm |
| Power supply | 12 V, 50 Hz ( AUM 18P.1, AUM18P.2, AUM 18P.TV ) |
| 6V DC ( AUM 18P.1B, AUM 18P.2B, AUM 18P.TVB ) | |
| Source of power supply | ZAC 1/20 ( max. 3x AUM 18P.xxx ) |
| ZAC 1/50 ( max. 8x AUM 18P.xxx ) |
- Set-up water inlet - G 1/2"
- Set-up cable for power supply 12 V, 50 Hz from source of power supply ZAC (does not apply to AUM 18P.xxB)
- A –
water supply
pipe G 1/2" inner thread - C –
electricity supply
- 1 –
shoe
- 2 –
nut M6
n
n
n
CONNECTION DIAGRAM
- A –
water supper
- C –
electricity supply
- 1 –
hose
- 2 –
plastic fastener
- 3 –
electronics in the box
- 4 –
tap
- 5 –
clamps
- 6 –
el. valve 12V
n
n
n
n
n
n
n
