AUM 05 sensor-controlled stainless steel washbasin
Nerezové umyvadlo AUM 05AUM 05 is a sensor-controlled stainless steel wall-mounted washbasin. The washbasin is equipped with a sensor-controlled outlet arm. Water turns on automatically when the user’s hands are placed within the sensor’s range and turns off when they have been removed. Water stops running with a certain time delay after the hands have been removed from the scanning zone. The washbasin is equipped with a mechanism against excess pressure of hot and cold water.
AUM 05 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
The AUM 05 stainless steel washbasin, in its construction and finish, meets EU standards and is mainly intended for food processing industry. It may be utilized in any other operations, where increased hygienic standards along with maximal water savings are required.
Package contents
- sink with sheathing
- outflow arm
- electronics
- electromagnetic valve (AUM 05.2 – 2 pcs)
- corner valve with filter (AUM 05.2 and .TV – 2 pcs)
- spherical valve (AUM 05.TV)
- thermostatic valve (AUM 05.TV)
- through-flow water heater (AUM 05.E)
- source of power supply ZAC E – 12 V, 50 Hz (AUM 05.E)
- waste siphon
- connecting hoses
- small assembly materials
| Radius of sensor | self-adjusting |
| Water inlet | G 1/2“ |
| Outlet | d = 40 mm |
| Inner dimension of the washbasin | 370 x 240 x 150 mm |
| Adjustable time of water flow | 0 – 4 sec. (adjusted to 1 sec.) |
| AUM 05.1, .2, .TV | |
| Water pressure | 0,1 – 1,0 MPa |
| Power supply | 12 V, 50 Hz, or for battery versions 6V (4 x AA battery) |
| Power requirement | 6 VA |
| 10 VA (AUM 05.2) | |
| Source of power supply | ZAC 1/20 (max. 3 x AUM 05.1, .TV, max. 2 x AUM 05.2) |
| ZAC 1/50 (max. 8 x AUM 05.1, .TV, max. 5 x AUM 05.2) | |
| Electricity protection | IP 55 |
| Weight | 10 kg |
| AUM 05.E | |
| Water pressure | 0,2 – 0,6 MPa |
| Recommended pressure | 0,3 MPa (without variances and air bubbles) |
| Power supply | 230 V, 50 Hz |
| Power requirement | 3 500 W |
| Electricity protection | IP 54 |
| Weight | 11,5 kg |
- Set-up water inlet as per picture
- Set-up outlet d = 40 mm
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (not designed for AUM 05.E)
- Set-up cable CYKY 3C x 1,5 – 2,5 (for AUM 05.E)
- A –
cold water
mixed water
inner pipe G1/2" - B –
hot water
inner pipe G1/2" - C –
electricity supply
- D –
outlet
- E –
zone of scaning
n
n
n
n
