AUZ 02 stainless steel free-standing toilet
AUZ 02 is a stainless steel toilet in a matte finish. It includes a gray seat with a lid made of hardened plastic to increase user comfort. AUZ 02 is designed to be placed on the floor against a wall or in a space and is suitable wherever it is not possible to attach a regular toilet to the wall, for example due to a thin supporting partition. The standard design of AUZ 02 is with waste down (can be used as a hygienic replacement for Turkish toilets), but upon agreement, waste can be discharged elsewhere (also from the side). The toilet is suitable to be supplemented with an automatic pressurized water flusher AUZ 3, an automatic flusher with a piezo button AUZ 3.P (or an anti-vandal flusher BSAZ 01) or any flushing device with a tank.
Due to its resistance to damage, the toilet is intended primarily for sanitary facilities with heavy traffic, such as highway rest areas, pubs, etc., where easy hygiene maintenance is required. We also produce toilets in a version for the physically disabled under the designation AUZ 02 INV.
The casing is made of 1.5 mm thick stainless steel sheet, the upper supporting part is made of 2 mm thick sheet. The toilet is also produced in an anti-vandal version intended for the most demanding operations (BSNZ 02) from 2 or 3 mm thick sheet, without a board and with ground, rounded edges. More about this version can be found in the safety section.
Other variants of stainless steel toilets can be found in the stainless steel toilets or stainless steel safety toilets departments.
The toilets are made of stainless steel of class ČSN 17240 (AISI 304). Other materials on request (e.g. AISI 316).
For the treatment of stainless steel products, we recommend using the Würth product – preservation (order no. 0893 121 K), cleaning (order no. 893 121 1).
Package contents
- stainless steel toilet including plastic seat
- anchoring material
AUZ 3 – automatic sensor pressure flusher
AUZ 3.P – automatic pressure flusher controlled by piezo button
BSAZ 01 – anti-vandal pressure flusher
| Water inlet | d = 34 - 50 mm |
| Min. water flow | 70 ltrs./min |
| Outlet | d = 90 mm |
| Weight | 19 kg |
- Water installation set up as per picture
- Set-up alcove for installation casket (only for AUZ 3)
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (only for AUZ 3)
- Set-up outlet d = 90 mm as per picture
- Set-up the cantilever or other system for hanging the toilet
