AUM 07S sensor-controlled stainless steel washbasin with knife sanitation container

AUM 07S is a sensor-controlled stainless steel washbasin with knife sanitation container intended for assembling in slaughter lines or onto a wall with limited space. The washbasin is equipped with sensor-controlled outlet arm. Water turns on automatically when the user’s hands are placed within the sensor’s range and turns off when they have been removed. Water stops running with a certain time delay after the hands have been removed from the scanning zone.
Part of the washbasin is a knife sanitation container with electric heating for 4 knives. The water temperature in the container is 83°C and is kept up by an electronic thermostat with a digital display. The sanitation container is equipped with inlet and outlet valves and over-flow to ensure a maximum height of the water level. The washbasin is equipped with a mechanism against excess pressure of hot and cold water.
AUM 07.S is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).

Package contents

  • sink with sanitation box and sheathing
  • outflow arm
  • photocell head
  • electronics
  • electromagnetic valve
  • corner valve with filter (AUM 07S.2, . TV – 2 pcs)
  • spherical valve (AUM 07S.TV)
  • mixing valve (AUM 07S.2)
  • thermostatic valve (AUM 07S.TV)
  • through-flow water heater (AUM 07S.E)
  • source of power supply ZAC E – 12 V, 50 Hz (AUM 07S.E)
  • waste siphon
  • covering Teflon plate and distance pad for knives
  • heating body
  • electronic thermostat
  • water inlet and outlet valve
  • connecting hoses
  • small assembly materials
Radius of sensor self adjusted
Water inlet G 1/2“
Outlet d = 40 mm
Inner dimension of the washbasin 240 x 300 x 100 mm
Electricity protection IP 55
Adjustable time of water flow 0 – 4 sec. (adjusted to 1 sec.)
Working temperature of sanitary liquid 83°C
Container size 3,5 l
AUM 07S.1, .2, .TV
Water pressure 0,1 – 1,0 MPa
Power supply 230 V, 50 Hz
Power requirement 800 W
Weight 12 kg
AUM 07S.E
Water pressure 0,2 – 0,6 MPa
Recommended pressure 0,3 MPa (without variances and air bubbles)
Power supply 2 x 230 V, 50 Hz
Power requirement 3 500 W
Weight 13,5 kg
  • Set up water inlet as per picture
  • Set up outlet for plastic pipe d = 40 mm
  • Set up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (does not apply to AUM 07S.E)
  • Set up cable CYKY 5C x 1,5 – 2,5 (for AUM 07S.E)

    • A
      cold water
      mixed water
      inner pipe G1/2"

n

    • B
      hot water
      inner pipe G1/2"

n

    • C
      electricity supply

n

    • D
      outlet

n

    • E
      zone of scaning

n

    • T
      thermostatic valve (AUM 07S.TV)

n

  • *
    made to order

Manual

Data for projectants

Manual