AUP 3.B II. generation – DOMINO urinal with capacitive flushing system – 6V (4×1,5)
AUP 3 – II.generation is ceramic urinal DOMINO with automatic capacitive flushing system. The sensor is located between the urinal outlet and siphon, cannot be seen and therefore is protected to damage. When the urinal is used, the capacitive field around the outlet is changed, the electronics evaluates this change and after the use of the urinal it generates an impuls for flushing. The new capacitive technology eliminates known disadvantages of other technologies – lower sensitivity to dark colours or the possibility of willful damage of the photocell by vandals.
After 24 hours inactivity the urinal flushes itself.
The assemblig set for the ceramic urinal DOMINO can be also obtained without the ceramic as AUP 23 set.
- ceramic DOMINO urinal (Jika)
- water jetting head
- electronics with aerial
- electromagnetic valve
- corner valve with filter
- connecting hoses
- battery holder (AUP 3.B)
- cylindrical batteries 1,5 V (AUP 3.B) – 4 pcs.
- screws, wall plugs (joggles) and hooks – 2 pcs.
NP 01 – stainless steel partition for urinals
ZAC – power supply unit 12V, 50Hz
|Water inlet||G 1/2“|
|Water pressure||0,2 - 0,8 MPa (AUP 3.B)|
|0,1 - 1,0 MPa (AUP 3)|
|Outlet||as per siphon|
|Adjustable time of flushing||1 - 20 s (adjusted to 5 s)|
|Power supply||12 V, 50 Hz (AUP 3)|
|6 V DC (AUP 3.B)|
|Power requirement||6 VA (AUP 3)|
|Power-supply unit||ZAC 1/20 (max. 3 x AUP 3)|
|ZAC 1/50 (max. 8 x AUP 3)|
|cylindrical batteries AA - 1,5 V (AUP 3.B) – 4 pcs.|
|Operating life of batteries||approx. 1,5 years at 100 flushes a day|
|Minimum water flow capacity||12 l / min.|
- Set-up water inlet, pipe 1/2“ – as per picture
- Set-up outlet d = 50 mm
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (not for AUP 3.B)
- A –
water inlet pipe G 1/2" inner
- B –
- C –
outlet (d = 50mm)
- E –