AUM 7 for sink with twin bowles

AUM 7 is an automatic sensor-controlled tap for sinks with the possibility of setting the water-flow and temperature by a lever mixer. Water turns on automatically after a brief shading of the photocell head by the user’s hand and turns off after repeated shading of the sensor. If repeated shading of the sensor does not occur, water stops flowing after the lapse of adjusted period of time.
The easy setting of the temperature and flow of water is controlled by a lever mixer according to the individual requirements of each customer. The water cannot flow when the lever mixer is fully lowered. The arm of the tap is rotary.
The tap is equipped with a mechanism against excess pressure.
Automatic sensor-controlled taps AUM 7 meet EU standards and are intended for facilities where the user’s comfort and the maintenance of hygiene is required at maximum water savings.

Package contents

  • tap with lever mixer
  • photocell head
  • electronics with a holder for hanging
  • electromagnetic valve
  • corner valve with filter – 2 pcs
  • battery holder (AUM 7.B)
  • cylindrical batteries 1,5 V (AUM 7.B) – 4 pcs
  • connecting hoses
  • fixing strap
  • M8 screw with nut and pads
  • tube with mastic
Product code Product name Price Price (VAT)
AUM 7 On demand On demand
AUM 7.B On demand On demand
Radius of sensor self-adjusting
Water inlet G 1/2“
Water pressure 0,2 – 0,8 MPa (AUM 7.B)
  0,1 – 1,0 MPa (AUM 7)
  0,3MPa (AUM 7.E)
Diameter of installation opening in washbasin min. 33 mm
After-flow period 5 – 100 sec. after 5 sec. (adjusted to 15 sec.)
Power supply 12 V, 50 Hz (AUM 7)
  6 V DC (AUM 7.B)
Power requirement 10 VA (AUM 7),6 VA (AUM 7.E)
Source of power supply ZAC 1/20 (max. 2 x AUM 7 or 3x AUM 7.E )
  ZAC 1/50 (max. 5 x AUM 7 or 8x AUM 7.E)
  batteries – 1,5 V (AUM 7.B) – 4 pcs.
Operating life of batteries approx. 1,5 years at 100 operations a day
Weight 2,5 kg
  • Set-up water inlet, pipe 1/2“ – as per picture
  • Set-up outlet – as per siphon
  • Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC (does not apply to AUM 7.B)

  • E
    zone of scanning

Manual

Data for projectants