MAP 1 coin-operated automat for energy release
MAP 1 is a coin-operated control intended for regulated usage of washing machine, dryers or other electrical appliances with power requirements referring to the switching abilities of an installed contractor. The power part is not part of the delivery and must be resolved separately in the frame of the electro-installation project.
After inserting coins into the control, the contactor is switched on and the device is connected to the power supply for a certain period of time. The user can prolong the time of connection to the power supply by inserting more coins.
On request it is possible to add the coin counter PM 2 or the stainless steel frame with lock cover.
MAP 1 can be used everywhere where a fee for a use of the electrical devices is required, e.g. in camping sites.
MAP 1 is manufactured from the stainless steel AISI 304. Other materials (e.g. AISI 316) possible on order. For cleaning we recomnned WÜRTH detergents – material preservation (no. 0893 121 K) and material cleaning (no. 893 121 1).
Package contents
- stainless steel casing
- coin scanner
- electronics
- box for coins
- casing of box with lock
RM 1 – power box for MAP 1
PM 2 – coin counter
Stainless steel frame with lock cover
| Power supply | 12V, 50Hz |
| Power requirement | 4VA (20VA peak time while scanning coins) |
| Source of power supply | ZAC 1/50 |
| Electricity outlet from the control | 12V, 50Hz or non-potential contact max. 24V |
| Outlet ampacity | Max. 3A |
| Actuation time | 5sec.–20min. (1CZK in 5sec. steps) Max. 85hours |
| Max. time of output switch | 85 hrs. |
| Accepted coins | 1, 2, 5, 10, 20 CZK |
| 0,1; 0,2; 0,5; 1; 2 EUR and tokens ZT 2 | |
| other coins made to order | |
| Weight | 2,6 kg |
- Set up alcove for coin-operated control installation
- Set up four-core cable from the coin operated control to the power box
- Connect the power wiring of the coin operated control and the power box according to the appliance in use
- Carry out the modification of the switchboard or set up the power box by transswitches.
