AUP 17 automatic NOVA urinal with a thermal sensor
AUP 17 is an automatic NOVA urinal using a thermal sensor for contactless control that reacts to temperature changes in the siphon after the use of the urinal. This thermal sensor generates a signal that is analyzed by the electronics, opens the electromagnetic valve and operates the flushing of the urinal. After 24 hours inactivity the urinal flushes itself.
The thermal sensor does not react to people standing near or passing by. The time setting for flushing is carried out without remote control. It is defined by switching off the source as per the maintenance manual.
The construction of the flushing system enables easy assembly simply by putting it into ceramics. The flushing system is protected against mechanical damage, even willful, as all components are placed in the ceramics body.
The ceramic urinal AUP 17 is intended for social facilities where the user’s comfort and the maintenance of hygiene is required at maximum water savings.
- ceramic NOVA urinal
- thermal sensor
- electromagnetic valve
- corner valve with filter
- self-priming siphon
- connecting hoses
- anchoring screw with cap – 2 sets
NP 01 – stainless steel partition for urinals
|Water inlet||G 1/2“|
|Water pressure||0,1 – 1,0 MPa|
|Outlet||d = 50 mm|
|Adjustable time of flushing||1 – 20 sec. (adjusted to 5 sec.)|
|Power supply||12 V, 50 Hz|
|Power requirement||6 VA|
|Source of power supply||ZAC 1/20 (max. 3 x AUP 17)|
|ZAC 1/50 (max. 8 x AUP 17)|
- Set-up water inlet, pipe 1/2“ – as per picture
- Set-up outlet d = 50 mm
- Set-up cable for power supply – 12 V, 50 Hz from source of power supply ZAC
- A –
water inlet inner pipe G 1/2"
- C –
electricity supply Cabel CYKY 2Ax1,5
- D –
outlet (d = 50mm)
- E –